Techspray PWR-4 Industrial Maintenance Cleaner
3400-20S (20 Oz)- MOQ 12
3400-G (1 Gallon)
3400-5G (5 Gallon)
3400-54G (54 Gallon)
The nonflammable, cost-effective industrial cleaner that swiftly removes oils, greases, and contaminants from electronics, relays and motors.
PRODUCT INFO
PWR-4 Industrial Maintenance Cleaner Blasts away oil and contaminants off of contacts, printed circuit boards, barcode instruments, switch boxes, gear boxes, and electronic motor controllers. Grease and oil flow right off, reducing the time and materials needed to scrub off stubborn soils.
Ideal where a safer, nonflammable, and cost effective cleaner is required. This innovative solvent is much safer than the four most common industrial solvents: TCE, nPB, Perc and Methylene Chloride and quickly cleans the most difficult greases and oils from electronics, relays, and motors. It is engineered to remain stable and effective over thousands of cycles in vapor degreasing equipment.
Removes oils, greases, silicones, refrigerant oils, fluxes, adhesives and other common industrial contaminants. Used for cleaning medical instruments, implants and other devices including orthopedic implants, monitoring devices, oxygen and gas lines. This solvent can be used as a carrier fluid like for silicone-based lubricant coatings.
FEATURES & BENEFITS
- Nonflammable
- Much safer than most common industrial solvents — TCE, nPB, Perc & Methylene Chloride
- Powerful cleaner — Ideal for degreasing and contact cleaning
- Available in aerosol or bulk for vapor-degreasing, ultrasonic and immersion cleaning
- Rapid evaporation
- Non-ozone depleting
- Cleaning applications: electronics, relays, switches & breakers, transformers, and electric motors and generators
- NSF registered K1 and K2
SPECIFICATIONS
- Boiling point – 118°F / 48°C
- Boil sump temp set – 127°F / 53°C
- High solvent temp set – 136°F / 58°C
- Refrigerant high temp set – 109°F / 43°C
Note: As with all vapor degreaser equipment and processes, observe all safety precautions, guidelines and operating rules associated with these units. Failure to do so may put operations personnel at risk. Avoid excessive vapor losses, loss of refrigeration, excessive boil sump heat, etc. Make sure all equipment is operated in accordance with the manufacturer’s guidelines and instructions. If in doubt, contact your manufacturer immediately.
For more information, please review the Technical Data Sheet and Safety sheet (20S) / Safety Sheet (Gallon).
Purchasing in bulk? Speak to our sales here to purchase in gallons or larger volumes.