FM-2023 Mini SMD Hot Tweezers / Conversion Kit 230V
[This is a pre-order product and will take 6-8 weeks to arrive. Kindly view pre-order FAQs before purchasing.]
Hot tweezers that enable easy removal of fine SMD chips and flat packages of up to 2mm in width. The composite-type design with a built-in heater facilitates the replacement of soldering tips.
Applicable for FM203 2-Port High Performance Rework Station and FM206 3-Port High Performance Rework Station. Please refer to the User Manual for detailed specifications.
SMD MINI PARALLEL REMOVER
The Hakko FM-2023 is designed for use with small chip components as small as 0201. The Mini Parallel Remover has a unique feature allowing it to work as a standard or reverse action tweezer. A simple flip of a switch sets the action of the tool.
- The small grip ensures to remove the smallest chips easily.
- Can choose standard or reverse tweezer action by switch lever.
- Direct heating prevents damage to neighboring components on high density board.
- ESD safe by design
|Power Consumption||140W (24V)|
|Temperature Range||200°C - 400°C (400°F - 750°F)|
|Temperature Accuracy||±10°C (±28°F) of set temperature|
|Temperature Stability||±5°C (±9°F) at idle temperature3|
|Tip to Ground Resistance||< 2 ohms|
|Tip to Ground Potential||< 2mV (Typical 0.6mV)|
|Cord Assembly||1.2m (4 ft.)|
|Total Length (w/o Cord and Tip)||75mm (3.0 in.)|
|Weight, Handpiece only (w/o cord)||32g (1.1 oz.)|
|Weight, T9-I tip||5g (0.18 oz.)|
|FM2023-02 Handpiece Only||Part No.|
|FM2023-04 Conversion Kit||Part No.|
|Tip (I shape)||T9-I|
|Heat resistant pad||B2300|
Soldering Tip (T9 Series)
|Part Number||Product Name|
|FM2023-02||Mini SMD Tweezers (Handpiece only)|
|FH200-04||Iron Holder with Cleaning Sponge, Power Save Function|
|B3412||Iron Holder Assembly with screw, for FH200-04|
|A1519||Yellow Cleaning Sponge (Replaces A1536)|
|A1536||Green Cleaning Sponge (Discontinued)|
|B2300||Heat Resistant Pad|
|599B-02||Tip Cleaner (with Wire Sponge)|