News
-
Intelligent Software for PCB Prototyping
The first step of PCB Prototyping is design. LPKF CircuitPro's imports data from design software, generates the individual processing steps, and prepares it for production, while guiding the user through the manufacturing process.
Read to learn more!
-
ESD Control Items Required in an EPA
ESD control items are necessary in an ESD Protected Area (EPA) to minimize damage to sensitive electronic components. Knowing what items are required might be overwhelming, but fear not, we've got you covered. Read to find out more! -
What is an ESD Protected Area (EPA)?
Manufacturing facilities with sensitive electronic devices and components are encouraged to have ESD protection areas (EPA) to effectively control ESD and prevent ESD damage. Read on to learn more about the fundamentals of EPA! -
Sources of ESD in Manufacturing Facilities
ESD, the hidden enemy in electronics manufacturing, is often the key cause of device failure. Preventing ESD begins with understanding what causes it occurs in the first place. Read on to find out the various sources of ESD! -
Dangers of ESD to Electronics
While ESD is not harmful to humans, it can cause severe damage to electronic components or even cause fire and explosion in hazardous areas. Read on to find out more about the dangers of ESD to electronic devices!
-
What is Electrostatic Discharge (ESD)?
Have you ever felt a jolt when you touched a doorknob, heard a crackling sound when you removed your sweater, or seen a lightning but could not figure out why? Read on to find out more! -
Ultra-Low Residue Fluxes for 5G
Indium Corporation has developed a suite of leading-edge materials and technology expertise to meet the demanding performance improvement of mobile communications that enable the dynamic 5G lifestyle. -
Conformal Coating Defects & How To Prevent Them
A single defect in conformal coating can compromise the long-term reliability of PCBs, necessitating time-consuming and costly repairs or rework. This issue can be avoided if defects are prevented in the first place. There are 6 common defects to look out for, as well as ways to avoid them. Read on to find out! -
Removal Methods of Conformal Coatings
Conformal coating must be removed if damaged PCB components need to be replaced, or if there are coating defects to be removed. To ensure that the PCB components are not damaged, each type of coating has its own removal methods. Read on to find out! -
Soldering and Flux
Flux is a chemical cleaning agent commonly used in soldering, but are you aware of its purpose? Read on to learn more about why it is used and why it is essential to remove flux residue once soldering is complete! -
Printed Circuit Boards - Better Milled or Lasered?
Milling VS Laser - Which is a Better Choice for You? At first glance, there are numerous ways to separate printed circuit boards (PCBs): Punching,... -
Curing Methods of Conformal Coatings
Curing requires conformal coatings to obtain complete hardness in order to achieve optimum properties for maximum performance protection of the circuit assembly. So, how many curing methods are there? Read to find out!
- Page 1 of 3
- Next page