FR702-67 Repair System 230V

• Powerful rework stations that contain every function needed for rework
• Safer and more secure rework operation
• With upgraded all the applications
• 4-in-1 unit for space saving
• Compatible with N2 system by purchasing N2 iron (FX-8802) as an optional accessary

Please refer to the User Manual for detailed specifications.

Click to shop compatible tips and nozzles:

Packing List

1. Station
2. Soldering iron (FX-8801)
3. Desoldering gun (FR-4103)
4. Iron holder for soldering gun (with cleaning wire)
5. Iron holder for desoldering iron (with cleaning sponge, cleaning wire)
6. Tool box (Cleaning pin for ø1.0 mm, Cleaning pin for heater
7. Cleaning drill for ø1.0 mm, Nozzle wrench
8. Filter [qty 2], Ceramic paper filter [qty 4])
9. Handpiece holder for hot air
10. Pad (Φ3mm, Φ5mm, Φ7.6mm: qty 2 each)
11. Heat resistant pad
12. Vacuum Pipe Control Knob (L with screw)
13. Color band (qty 2)
14. Power cord
15. Instruction manual

Features

4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air
It handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.

Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.

High-power Desoldering gun HAKKO FR-4103
Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time. A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.

• Long type nozzles for narrow space
• Oval shape nozzles for flat terminals
• SS type nozzles for micro land-patterns

Soldering iron HAKKO FX-8801/FX-8805
Thermal conductivity has been increased by reviewing external configuration and internal structure of 900 tip series. Now T18 and T19 tip series are selectable depend on work environment.

Hot air handpiece
670 W high power and large volume hot air improves work efficiency for quick removal of components.

New type of nozzles for improvement of temperature characteristics
The new nozzle improves work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (only with BGA nozzles)

Vacuum pickup function
The vacuum pick up function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This prevents damaging the circuit board by removing a component with excessive force.

Pickup indicator lets you know the pickup timing at a glance!
By pre-setting pickup function, a component can be picked up automatically when solder is melted. The indicator will light up to show when the component is picked up. This works even for components and solder joints that are covered by the nozzle, making it easy and safe for pick ups.

N2 soldering iron HAKKO FX-8802

The N2 gas runs into the nozzle assembly and covers the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating.

Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc.

T18 tips series are compatible with this application.

One-hand Manual-solder-feed iron HAKKO FX-8803

• Solder and feed with one hand
• Feed a set amount of solder with one hand
• Manual feed system is perfect for cellular manufacturing.
• Soldering work can be conducted at the pace of the operator.
• T18 tips series are compatible with this application.

SMD Hot Tweezer HAKKO FX-8804

• Direct heating—less influence upon surrounding components on crowded boards.
• Easily removes SMD chips and flat packages up to 25mm.
• The collet allows easy replacement and alignment of the tips.

Specifications

Station

Station (Soldering)

Desoldering Station

Station (Hot air)

Soldering iron

Desoldering Gun

Handpiece (Hot air)

* The suction flow is measured at the filter case suction port of station.
* Airflow capacity is rated as free flowing. Restrictions created by various nozzles may reduce the maximum airflow capacity.
* Total length and weight (w/o cord, hose)

Accessories

• T18 Series
• N61 Nozzles
• N51 Nozzles

Replacement Parts

Options